Small Capacity, Single Stage, Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, and Marine Services

Specifications

• Capacities to 8,000 GPM (1817 m3/h)
• Heads to 570 Ft. (174 m)
• Temperatures to 350° F (177° C)
• Working Pressures to 400 PSI (2758 kPa)

Design Features

• Horizontally Split Casing In-line suction and discharge nozzles in lower half casing for ease of inspection/maintenance.
• Double Suction Impeller Assures Hydraulic Axial Balance for lower thrust bearing loads, longer pump life, and lower maintenence.
• Dual Volute Casing Assures Radial Balance for lower radial bearing oads, longer pump life and lower maintenance. (Not available on 3408. Availability on 3410 is size dependent.)
• Wear Rings Easily replaceable wear rings renew running clearances and protect against impeller, casing wear. Overall cost of operation is minimized.
• Sealing Flexibility Choice of packing or wide range of mechanical seals.
• Installation Versatility Horizontal or vertical mounting, clockwise/counterclockwise rotation
• Material Flexibility Available in a wide variety of metals from cast iron to stainless steels.

Services

• Process Quench water, stripper bottoms, reboiler circulation, cooling tower.
  
• Pulp & Paper Primary and secondary cleaner, filtrate, mill water supply, fan pump, headbox supply, shower.
  
• Primary Metals Cooling water, quench and leaching.
  
• Municipal High lift, low lift, wash water, waste water, raw water.
  
• Power Generation Cooling tower, component cooling, service water, ash slucing, heater drain.
  
• Marine Bilge and ballast, cargo, cooling water, fire pump.
• General River water, brine, sea water.