Compli 400

The compli 400 is the smallest of our packaged sewage disposal units. It has been specifically designed for the disposal of sewage from single dwellings. For easy access and service it is installed on the ground of a basement or in an accessible sump.

The ready to connect control unit is pre-wired with the pump and the level control. An additional inlet is available for other waste water discharge points such as shower, washing machine or sink. The compli 400 consists of long lasting materials: rust-proof steel for the shaft and polyethylene for the 50-l-tank.

• PE-tank capacity approx. 50 Ltr.
• inlet flange DN 100
• floor to centre inlet 250 (180) mm
• Hmax = 7 m
• Qmax = 48 m3/h

Compli 500

The compli 500 has been designed specifically for the disposal of sewage from single dwellings with continued sewage water inlet and for a larger tank volume. It is also extremely easy to handle and installation requires a minimum of space.

The PE-tank has accessible pipe connections and a particularly simple "pinch" type inlet flange for the connection of pipe or bend. As all units, the maintenance is extremly simple: the tank has a top mounted inspection opening and, if necessary, the pumping unit can be removed/ replaced in minutes and without disturbing the tank assembly.

• PE-tank capacity approx. 100 Ltr.
• inlet flange DN 100
• floor to centre inlet 315 (250) mm
• Hmax = 18 m
• Qmax = 73 m3/h

Compli 1500 - 2500

The units compli 1500 and 2500 have been designed for the disposal of sewage from industrial, public and semi-public buildings, apartment blocks, flats, etc. for an uncontrolled effluent flow and specially where a safety factor must be provided.

• PE-tank capacity approx. 500 bzw. 1000 L
• inlet flange DN 150
• floor to centre inlet 700 mm
• Hmax 22 m
• Qmax 100 m3/h